Herunterladen Diese Seite drucken

Scheppach 59061659969 Originalbetriebsanleitung Seite 23

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

h.
Do not let familiarity gained from frequent use
of tools allow you to become complacent and ig-
nore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
Power tool use and care
Do not overload the device. Use the correct
a.
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
b.
Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous
and must be repaired.
c.
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any adjust-
ments, changing accessories, or storing pow-
er tools. These precautionary measures will pre-
vent the electric tool from starting unintentionally.
Store idle power tools out of the reach of chil-
d.
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users. Unused electric tools
should be stored in a dry, elevated or closed loca-
tion out of the reach of children.
e.
Maintain power tools and attachments. Check
whether moving parts function properly and do
not get stuck and whether parts are broken or are
damaged and thus adversely affect the electric
tool function. If damaged, have the power tool re-
paired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
f.
maintained cutting tools with sharp cutting edg-
es are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits
g.
etc. in accordance with these instructions,
Take into account the working conditions and the
work to be performed. Use of the power tool for op-
erations different from those intended could result
in a hazardous situation.
Keep handles and grasping surfaces dry, clean
h.
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
Service
a.
Only have your power tool repaired by quali-
fied specialists and only with original spare
parts. This ensures that safety of the electric tool
is maintained.
Safety instructions for compressors
m Attention! The following basic safety measures must
be observed when using this compressor for protection
against electric shock, and the risk of injury and fire.
Read and observe these instructions before using the
device.
Safe work.
1.
Take care of your tools
- Keep your compressor clean in order to work well
and safely.
- Follow the maintenance instructions.
- Check the connection cable of the electric tool
regularly and have it replaced by a recognised
specialist when damaged.
- Check extension cables regularly and replace
them when damaged.
2.
Pull the connector out of the socket
- When the electric tool is not in use or prior to
maintenance and when replacing tools such as
saw blades, drills, cutters.
3.
Check the electric tool for potential damage
- Protective devices or other parts with minor dam-
age must be carefully inspected to ensure that
they function correctly and as intended prior to
continued use of the electric tool.
- Check whether the moving parts function fault-
lessly and do not jam or whether parts are dam-
aged. All parts must be correctly mounted and all
conditions must be fulfilled to ensure fault-free
operation of the electric tool.
- Damaged protective devices and parts must be
properly repaired or replaced by a recognised
specialist workshop, insofar as nothing different
is specified in the operating manual.
- Do not use any faulty or damaged connection cables.
4.
Attention!
- For your own safety, only use accessories and
additional equipment that are indicated in the
operating manual or have been recommended or
indicated by the manufacturer. Use of other tools
or accessories that those recommended in the
operating manual or in the catalogue could rep-
resent a personal danger to you.
www.scheppach.com
GB | 23

Werbung

loading

Diese Anleitung auch für:

Hc26si