Inhaltsverzeichnis
Werbung
Installation guide
3 Product description
3 Gerätebeschreibung
3.1 Structure
3.1 Aufbau
LinMot ATEX linear motors are assembled into a complete servo drive system consisting of
several connected components (see the illustration below).
Die LinMot ATEX Linearmotoren werden in einem Verbund aus mehreren Komponenten (siehe
Abbildung unten) zu einem kompletten Servo-Antriebssystem zusammengebaut.
1. Power supply
Leistungsspeisung
2. Circuit breaker
Leistungsschütz
3. Control unit „LinMot Servo Drive"
Steuerungseinheit „LinMot Servo Drive"
4. Temperature relay
Temperaturrelais
Circuit breaker
Interrupts the system power supply if the maximum surface temperature setting is exceeded.
LinMot Servo Drive
Performs position control, temperature monitoring, current regulation, and monitoring of the
power supply.
Temperature relay
Receives values from the Kty temperature sensors mounted on the exterior of the motor
under the stainless steel housing. In case of a fault (overtemperature), it initiates the
interruption of the power supply to the servo drive. Feedback to the machine control system.
NTI AG / LinMot
"Safe side"
Elec. enclosure
„Sichere Seite"
Schaltschrank
1.
2.
3.
®
www.LinMot.com
4.
6.
5.
5. Power
Leistung
6. Signals (motor communication;
Internal temperature monitoring)
Signale (Motorkommunikation;
Interne Temperaturüberwachung)
7. Linear motor
Linearmotor
8. Kty temperature sensors
Kty-Temperatursensoren
"Hazardous side"
Ex environment
„Gefährliche Seite"
Ex Umgebung
7.
8.
9 / 48
Werbung
Inhaltsverzeichnis
