7. Applications Work Positioning ROPEgrip
EN 358
For use in accordance with EN358, the fasteners used
must comply with the requirements of EN 362.
Load direction
For use in accordance with ANSI Z359.3, the fasteners used
must comply with the requirements of ANSI Z359.12.
Mittelmann Sicherheitstechnik GmbH & Co KG - Bessemerstrasse 25 - DE-42551 Velbert
Phone : +49 (0)2051 / 91219-00 - Fax : +49 (0)2051 / 91219-19 - Email : info@mittelmann.com
- 9 -
ANSI Z359.3
EN 795
The wire rope sling can also be looped
around structural installations with an
edge radius of at least r = 0.5 mm
without a protective sleeve.
The length adjustment device may be
used in
not be used in this application.