Cleaning With The Brush - Panasonic ES-ST3N Betriebsanleitung

▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the shaver,
and the trimmer [A;] completely.
• Allow the shaver to dry in the
shade, avoid direct sunlight and
then apply oil.
9. Lubricate the shaver.
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each of
the system outer foils.
2. Raise the trimmer and apply a
drop of oil.
3. Switch the shaver on, and run it
for approximately five seconds.
4. Switch off the shaver, and wipe
off any excess oil from the
system outer foil with a soft cloth.
►Notes
• Do not use any kitchen or bathroom detergents other than
hand soap.
Doing so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration
of the parts.
Wipe with diluted soapy water.
• Be careful not to hit the main body on the sink or any other
object while draining the water. Failure to do so may cause
malfunction.
▼

Cleaning with the brush

Remove the outer foil section and the inner blades.
(See this page.)
►Cleaning with the long brush
Clean the outer foil section
[A], system outer foil [A1],
the shaver body [A] and the
trimmer [A;] using the long
brush.
►Cleaning with the short brush
• Clean the inner blades [A:] using the
short brush by moving it in direction as
illustrated.
• Do not move the short brush
perpendicularly against the blades as it
will damage the inner blades and affect
their sharpness.
Replacing the system outer foil and the inner blades
system outer foil
inner blades
►Removing the outer foil section
Press the foil frame release buttons [A3] and
lift the outer foil section [A] upwards.
once every year
once every two years
17