Scheppach CCM130 Originalbetriebsanleitung Seite 21

• Do not leave ready-to-use compulsory mixer unat-
tended.
• Switch off the machine and pull out the mains plug
when leaving the workstation.
Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Danger of injury due to rotating parts.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Before performing setting or maintenance work, re-
lease the start button and pull out the mains plug.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet.
Use the tool that is recommended in this operating
manual. This is how to ensure that your machine
provides optimum performance.
• Keep your hands away from the working area when
the machine is in operation.
Warning! This power tool generates an electromagnet-
ic field during operation. This field can impair active or
passive medical implants under certain circumstances.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.
6. Technical data
Engine
Engine output
Max. speed
Mixer speed max.
Capacity
Mixed volume
Protection category
Operating mode*
Protection class
Dimensions
Weight
Subject to technical changes!
* Operating mode S1, continuous operation
Noise & vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
Noise data
Sound power level L
Sound pressure level L
Uncertainty K
Vibrations
Vibration a
7.
Open the packaging and carefully remove the device.
Remove the packaging material, as well as the pack-
aging and transport safety devices (if present). Check
whether the scope of delivery is complete. Check the
device and accessory parts for transport damage. In
the event of complaints the carrier must be informed
immediately. Later claims will not be recognised. If pos-
sible, keep the packaging until the expiry of the war-
ranty period.
Familiarise yourself with the device by means of the
operating manual before using for the first time.
With accessories as well as wearing parts and replace-
ment parts use only original parts. Spare parts can be
obtained from your specialist dealer.
When ordering please provide our article number as
well as type and year of manufacture for your equip-
230 V~ / 50 Hz
ment.
2000 W
m ATTENTION!
1500 rpm
The device and the packaging material are not
30 rpm
children's toys! Do not let children play with plas-
120 l
tic bags, films or small parts! There is a danger of
choking or suffocating!
100 l
IP44
www.scheppach.com
WA
pA
WA/pA
h
Unpacking
S1
I
755 x 840 x 1250 mm
123.6 kg
86 dB
75 dB
3 dB
2,1 m/s²
GB | 21