Switching off
DANGER! Risk of injury
through burning!
The device remains very hot after it is
switched off, and must not be touched.
Only transport the device when it has
cooled down, and when doing so only
use the handles intended for this pur-
pose.
1. Switch off the device by turning the ther-
mostat control 9 to OFF.
2. Pull out the mains plug 4.
3. Let the device cool down before mov-
ing, cleaning and storing it away.
4. Disconnect the plug with thermostat 5
from the device when it has cooled
down completely.
5. Clean the device as soon as possible af-
ter it has cooled down. Do not allow
any residues to dry in the pan 7.
Cleaning
Before cleaning the device, remove the
mains plug 4 from the wall socket and the
plug with thermostat 5 from the socket 6.
Before reconnecting the device, make sure
that the socket is completely dry.
For additional information on clean-
ing and looking after the device and
accessories, please see the online
user instructions.
Disposal
Packaging and device must be disposed of
according to the environmental regulations
of your country.
16 GB
Trouble-shooting
If your device fails to function as required,
please read the corresponding chapter in
the online user instructions.
Symbols used
Geprüfte Sicherheit (certified
safety): devices must comply with
the generally acknowledged
rules of technology and the Ger-
man Product Safety Act (Produkt-
sicherheitsgesetz - ProdSG).
(Not for UK)
With the CE marking,
HOYER Handel GmbH declares
the conformity with EU guide-
lines.
This symbol reminds you to dis-
pose of the packaging in an envi-
ronmentally friendly manner.
Recyclable materials are marked
with the recycling symbol (3 ar-
rows). The material can be speci-
fied by the recycling number in
the centre (here: 21) and/or an
abbreviation (here: PAP).
AC voltage
The symbol identifies parts that
can be cleaned in the dishwasher.
It is a recyclable product which is
subject to an extended producer
responsibility and for which the
rules of waste separation apply.
With the UKCA marking,
HOYER Handel GmbH declares
that the product is in conformity
with the UKCA requirements.
The symbol identifies the product
manufacturer.
Subject to technical modifications.