Silvercrest SEMP 2000 A1 Kurzanleitung Seite 14

Before cleaning the device, remove the mains plug from the wall
socket and the plug with thermostat from the socket. Before recon-
necting the device, make sure that the socket is completely dry.
This device is intended for use in households and in applications
similar to households, such as ...
... in kitchens for staff in shops, offices and other commercial set-
tings;
... on agricultural properties;
... by customers in hotels, motels and other residential facilities;
... in bed-and-breakfast establishments.
This device is not intended to be operated using an external timer
or a separate remote control system.
The device may only be used with the power cable supplied, in-
cluding the plug with thermostat. If the power cable or the plug
with thermostat is damaged, the power cable must be replaced
by the manufacturer or its customer service department or a simi-
larly qualified individual in order to avoid hazards.
Clean all parts and surfaces that will come into contact with food
before using the device for the first time.
The surface of the heating element remains hot after use.
Liquid must never overflow onto the plug connections of the device.
Packing materials are not children's
toys. Children should not be allowed to
play with the plastic bags: there is a risk
of suffocation.
Ensure that children are not able to pull
the device down from the work surface
by the power cable.
Keep the device out of the reach of chil-
dren.
Electrical devices can represent a dan-
ger to pets and livestock. In addition,
animals can also cause damage to the
device. For this reason you should keep
animals away from electrical devices at
all times.
The device, the power cable and the
mains plug must not be immersed in wa-
ter or any other liquids.
12 GB
Protect the device from moisture, water
drops and water splashes.
If liquid gets into the device (e.g. into
the socket), pull out the mains plug im-
mediately. Have the device checked be-
fore reusing.
Never touch the device with wet hands.
If the device falls into water, disconnect
the mains plug immediately. Only then
is it safe to remove the device.
Do not insert the mains plug into a wall
socket until the plug with thermostat is firm-
ly connected to the socket on the device.
Only connect the mains plug to a prop-
erly installed and easily accessible
earthed wall socket whose voltage cor-
responds to the specifications on the rat-
ing plate. The wall socket must still be