5. Tap "Operation confirmed" and click "Next." The page wil show
"Searching for nearby Bluetooth devices."
6. Enter the correct Wi-Fi and password then click "Next" to add the
device. You will hear "connecting to Wi-Fi,"
7. After successfuly connected, you will hear "Wi Fi connected" and
the "Device added" page will appear. The LEDindicator will stay solid
blue and you can find the basestation in the device list.
Connect
the
Link*
Pro Smoke
The Linkf
Pro Smoke
Alarm
can be connected
through the wireless network. When the alarm is connected to the
basestation, you can receive push notifications wherever you areto
stay informed of the device status, and to silencean alarm from your
smartphone.
NOTE:Before adding devices to the system, make sure the base
station has been successfully added to the app.
Alarm
to the
Base
Station
to the base station
08
1.Tap " O ",select "Smoke Alarms",and then select "Link* Pro Smoke
Alarms (working with SBS50BaseStation)"in the product list.Then,
tap "Next" to enter the pairing page.
2. Follow the prompts on the page by pressing the test/silence button
twice on the side of the smoke alarm until the red LEDflashes rapid y,
indicating that the device is waiting to connect to the Wi-Fi.
3.Tap "Next" to add the device.You will hear "Readyto add the device."
4. After successfu y connected, you wil hear"Device added" and the
"Device added" page will appear.Then you can find the smoke alarm
in the device
list.
5. If you want to add multiple devicesinto the system,please repeat the
above steps.
NOTE:If you fail to add the smoke alarm to the network within 60
seconds, the device will automatically exit the network
configuration. TOre-enter the network configuration, you need to
repeat the above steps.
Interconnect
the Alarms Without Adding to the
Base
Station
f you don't want to add the smoke alarms to the basestation, you can
connect the smoke alarms using RFtechnology to create an
interconnected alarm system. However, you will no onger be able to