x-sense Link+Pro XS01-M Bedienungsanleitung Seite 15

Silence Mode Red LED tlashes
every 5 seconds.
Low Battery Red LED flashes
every 60 seconds.
Malfunction Red LED flashes
twice every 60
seconds.
Alarm Mode
For devices connected to the base
• When an alarm istriggered, an in app messagewill appear and an alarm
push notification will be sent to your smartphone.
• When one alarm istriggered, all devices connected to the system and the
base station will sound an alarm simultaneously.
• The base station will automatically mute after 10 minutes of continuous
alarm. After the base station stops the alarm, all devices in the
once After 9 minutes,
None.
the unit wil
silence mode.
once 1 beep Rep ace the
every 60 device
seconds. immediately.
2 beeps Please clean your
every 60 alarm and see if it
seconds. is working
normal y. f not,
replace the
device
immediately.
station:
26
interconnected system will still alarm.
• In the case that the base station powers off and isdisconnected from the
exit
network. all dewicesare still interconnected, so when one alarm istriggered,
all will go off.
• The volume level of the base station is adjustable. The alarms and base
station can be remotely muted through the app. An app push notification
will be sent to your phone when the smoke drops below the alarm
threshold.
1. If the Initiating Unit Is Triggered by Smoke:
When one XSOI-M smoke alarm istriggered in the interconnected network,
the unit will beep 3 times every 4 seconds, paired with red LEDflashing. Any
other units will follow suit—they will beep 3times every 4 seconds, paired
with the LED flashing red and green in succession (or only red LEDflashing for
XSOI M) When the smoke concentration level drops be ow the alarm
threshold, the alarm will cease.
2. If the Initiating Unit Is Triggered by CO:
When one CO alarm istriggered in the interconnected network, the unit wi
beep 4 times every 58 seconds, paired with the LEDflashing red. Any other
units wil follow suit—they will beep 4 times every 58 seconds, paired with
the LED that flashes red4 times first,followed bythe LED that flashesgreen
once with every beep (or on y red LEDflashing for XSOI-M). When the CO
concentration level drops be ow the alarm threshold, the alarm will cease.
For more details, please see "LEDIndicator and Audible Alarm"