x-sense Link+Pro XS01-M Bedienungsanleitung Seite 10

NOTES
1. The devicesconnected to the basestation can only be tested
individually. Theinterconnected devices that are not connected to
the base station can be tested by holding down the test/silence
button on one Of the devices.
2. The test function accurately tests the alarm's smoke sensing
circuit without the need to test with smoke. If your smoke alarm
fails to give an audible test signal, please refer immediately to the
troubleshooting guide at the end Of this manual. Never usean
open flame to test this device.
16
Installation Positioning
Bedroom
Garage Living Room (@i) Kitchen CD
Laundry Rcmom
Smoke Alarms
CO Carbon Monoxide Alarms
Heat Alarms
NOTE: Ifa smoke alarm is installed
accessible silence button, and install it as far away from the stove
and sink as possible to avoid false alarms.
Study(D
Smoking Room
easement 00
Smoke & Carbon Monoxide
FireExtinguishers
in a kitchen, ensure it has an
Alarms