x-sense Link+Pro XS01-M Bedienungsanleitung Seite 19

The device The device does
does not
not turn on,
sound
during
testing,
You don't push the
test/silence button
firm y.
The device is
improperly
installed.
The app push
The app
notification
push
permission IS
notification
disabled.
is delayed or
there are no
The base station
push alerts.
not within the
network coverage
of the router.
Pleaseensure the battery
insulating film is removed and
the device is turned on, If the
battery runs out, replacethe
battery immediate y,
Make sure you push the
test/silence button firmly.
Check the installation
positioning. The wireless signal
might be blocked or out of
range.
Turn on the push notification
permission on the phone.
is The distance between the base
station and the router should
be within 164 ft (50 m). Please
ensure that the base station
a ways within the network
coverage of the router.
34
False alarms
are triggered
intermittently
or when
residents are
cooking,
taking
showers, etc.
Red LED
flashes and
the alarm
is sounds 1
beep every
60 seconds
The communication Reduce the obstacles
between the smoke the smoke
alarm and base station. The
station is not stable between
or they are too far base station in an open
environment
apart.
The device is nstall the device far away from
improperly instal ed. kitchen appliances,dusty places,
shower areas, and locations
where the temperature
OO'F(37_8'C) or below 400F
(4.400. Check the location of
your alarm (see"Installation
Positioning").
The device is Clean the device periodical y
clogged by dirt and (see "Maintenance").
dust.
Low battery. The battery is ow. Replace the
battery immediately
between
alarm and base
maximum distance
the device and the
is 1,640 ft (500 m).
is over