x-sense Link+Pro XS01-M Bedienungsanleitung Seite 16

NOTES
1. When one unit is triggered, other interconnected units will sound.
If the smoke alarm and COalarm are triggered in the network at
the same time, the alarm signal ofthe smoke alarm will take
priority over that of the COalarm.
2. This alarm has a relay function that extends the wireless
interconnected network for wide detection coverage.
Silence Mode
You can silence the device by pressing The test/silence button on the device
or tapping the silence button in the app.
f you pressthe silence button during an alarm state,the unit will be in the
silence mode for g minutes. During the silence mode, the red LED will flash
once every 5 seconds, The alarm will enter the normal mode after 9 minutes.
When Connected to the Base
You can silence the base station and all interlinked
detected by pressing the Silence button on the base station or by tapping the
Silence button in the app.
You can tap the Locate button in the app to find the initiating alarm; al
devices wil stop alarming except the initiating alarm Simply silence the
initiating alarm by tapping the silence icon in the app or by pressing the
test/silence button on the device.
Station
alarms when smoke is
28
When Not Connected to the Base Station
Simply pressthe test/silence button on one of the devices to silence the
interconnected system, however only silencing the initiating alarm will silence
all other interconnected alarms.
NOTES
1. You can silence all interconnected units by pressing the
test/silence button on one of the units. 'fone unit is still alarming,
it is the initiating unit (the unit that detected danger); to silence all
interlinked units, you must also press the test/silence button on
the initiating unit.
2. While interconnected, the initiating unit cannot be triggered
again during the 9-minute silence duration. However, all other
interconnected units can be triggered again if they detect danger
during the silence mode.
Technical Specifications
Specifications of Base Station
Model
sassa
Power Supply nput: 100-240 V AC 50/60
Operating Temperature 40— 1OOOF ( 4.4—37800
Operating Relative 0-85% RH (non condensing)
Humidi
Output: 5.0
29
.OA