x-sense Link+Pro XS01-M Bedienungsanleitung Seite 13

Battery Replacement
1. To replace the battery, detach the smoke alarm from the mounting
bracket by twisting counterclockwise.
2. Pull the battery removal tab to remove the battery, and then install a
new battery, matching the correct polarity markings.
3. Test the alarm, and then mount the alarm onto the mounting
bracket by twisting clockwise to Ockthe alarm.
o
o o
22
LED Indicator and Audible
Status LED Indicator
Red LED flashes
Standby Mode
once every 60
seconds.
Unit detects
Red LED
smoke and flashes 3 times
initiates an every 4
alarm. seconds.
Alarm
All other • XSOl-VcRed
Mode
interconnected flashes 3 times
units in the en.'ery 4 seconds
network. • Devices with a
2-coIor/3
LED indicator:
The LEDflashes
redandgreen3
times
sequentially
every 4 seconds.
Alarm
Audible Action
Alarm
None.
3 beeps Dangeroussmoke
every 4
concentration
seconds. detected.Open
nearbywindows
and doors and
immediate y
move to fresh air.
3 beeps Dangeroussmoke
LED
concentration
seconds. detected by the
initiating unit in
color the network.
P ease find the
initiating unit and
take action.
23
is
is