Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When you connect the hob to the power supply, a beep
will sound after a few seconds: you can now turn the hob
on.
Turning on the hob
Press key
. to turn the hob on.
Cooking zone control
Each cooking zone is operated by a control key and by a
power adjustment set (
Turning on a cooking zone
•
To turn a cooking zone on, press the corresponding
control key and set the desired heating power (from 0 to 9)
using the "
" and "
" keys.
•
To set the maximum power directly (9), press key "
briefly.
(only for Radiant zones):
To speed up the rise in temperature on a particular cook-
ing zone, proceed as follows:
1. set the cooking zone power to the maximum set-
ting (9),
2. then press the "
cate "A",
3. now set the power you wish to cook with (for exam-
ple 5).
Turning off a cooking zone
To turn off a cooking zone, press the corresponding con-
trol key and:
•
press both "
" and "
ing zone power drops immediately to zero and the zone
is turned off.
•
or press the "
" key: the heating power drops pro-
gressively until the zone eventually turns off.
Turning off the hob
Press the
key; the appliance has been turned off.
If you have locked the hob controls (see paragraph be-
low), the same will still be locked when you turn the hob
back on. Unlock the controls in order to operate the cook-
ing zones.
The booster
To speed up the rise in temperature of the cooking zones
(see cooking zone table on the previous page), press the
key.
Booster
The power display will indicate "P". The booster function
comes to an automatic stop after 4 minutes.
/
).
00
00
00
" key: the power display will indi-
" simultaneously: the cook-
Operation
When the booster function is on, certain cooking zones
(see the cooking zone table on the previous page) are lim-
ited to a maximum power of 600W.
Controls lock
When the hob is in use, you can lock the controls to avoid
any accidental changes to the settings (by children or when
cleaning, for example).
Just press the
lights up and the controls are locked.
To change the power level setting or stop cooking, the
controls have to be unlocked: press the
tor light turns off and the controls are unlocked.
To access the setting of a cooking zone again, select the
zone by pressing the corresponding control key.
Cooking time programming
You may programme all the cooking zones simultaneously
for a maximum cooking time of 99 minutes.
Proceed as follows:
•
select the cooking zone by pressing the correspond-
ing control key,
"
•
set the desired heating power using the "
"
" keys,
•
press the programming key
•
set the desired cooking time using the "
"
" keys,
•
confirm your programming by pressing the program-
ming key
The countdown begins immediately.
The end of programmed cooking is signalled by a beep
(one minute long) and the cooking zone concerned is turned
off.
Triple induction plate operation
The operation of this plate depends mainly on the diam-
eter of the pans which are used during cooking:
·
if the pan's diameter falls within the first marked-
off area, it will be possible to switch on the indi-
vidual internal plate. In this case, the booster does
not work and the power output is 1800W;
·
if the diameter of the pan falls between the first
and second marked-off areas, the maximum power
output increases to 2400W (up to 3000W with the
Booster enabled);
·
if the diameter of the pan exceeds the second
area and falls between the second and third ones,
the power output of the plate may reach 3000W
(up to 4000W with the Booster enabled).
Therefore, the Booster function may be enabled only in
the last two cases indicated, with an energy absorption of
between 3kW and 4kW, depending on the diameter of the
pan; that is, when the size of the pan exceeds the diam-
eter of the first area. The booster function is not enabled if
you use only the smallest central cooking zone (1800W).
32
key, the indicator light next to the key
,
again.
key, the indica-
" and
" and
Werbung
Inhaltsverzeichnis
