Silvercrest SAS 100 A1 Bedienungsanleitung Seite 31

˜ Cutting
NOTES:
Always press before pressing
[ 6 ]
preventing damaging the switch system.
Always use the slicing carriage
waste holder when cutting.
[ 12 ]
Clean the product and the circular blade
straight after cutting fatty foods (e.g. meat,
sausages, cheese) (see "Cleaning and
care").
Place the food to be cut on the slicing
carriage .
[ 10 ]
Press the food with the waste holder
lightly against the positioning plate
Guide the food through the cutting process by
lightly pushing the slicing carriage
the rotating circular blade
After cutting: Pull the slicing carriage
backwards. Repeat the process until the
desired number of slices has been cut.
˜ Troubleshooting
Problem Cause
The power
plug
15 ] [
connected to a
power outlet.
The product
is not
functioning.
[ 6 ]
pressed.
28 GB/IE
for
[ 5 ]
and the
10 ] [
4 ] [
12 ] [
.
13 ] [
against
[ 10 ]
.
4 ] [
10 ] [
Solution
Connect the
is not power plug
15 ] [
to a power
outlet.
Press and hold
.
[ 6 ]
Press and hold
is not
until
[ 5 ]
the circular
blade starts
4 ] [
up.
˜ Cleaning and maintenance
DANGER! Risk of electric shock!
Before cleaning or maintaining the product:
Disconnect the power plug
power outlet.
DANGER! Risk of electric shock!
Do not immerse the product in water or other
liquids. Never hold the product under running
water.
m CAUTION! Risk of injury!
The circular blade
[ 4 ]
hold the circular blade
surface but instead by the blade lock
m CAUTION! Risk of injury!
The circular blade
[ 4 ]
the product if it is not properly installed.
Lock the mechanism into place correctly
during assembly (blade lock
horizontal!).
˜ Cleaning (after each use)
NOTE: Do not use any abrasive, aggressive
cleaners to clean the product.
Cleaning the circular blade
NOTES:
Clean the circular blade
with warm soapy water.
The circular blade
4 ] [
dishwasher.
Fold the slicing carriage
the right and out of the joint.
G
from the
15 ] [
is very sharp. Never
by the cutting
[ 4 ]
.
[ 3 ]
can fall out of
must be
3 ] [
after every use
[ 4 ]
is not suitable for
up and pull it to
10 ] [
3 ] [
4 ] [