Silvercrest SAS 100 A1 Bedienungsanleitung Seite 30

˜ First use
DANGER TO LIFE FROM ELECTRIC
SHOCK! Do not use the product next to a
sink full of water!
Remove the packaging.
Clean the product and its accessories
(see "Cleaning and care").
Place the product on a level, clean surface.
The product has feet with suction cups
and anti-slip feet
16 ] [
Fold down the table
Unwind the power cord
cord through the power cord guide
15 ] [
Insert the slicing plate
carriage firmly (Fig. C).
10 ] [
Place the slicing carriage
the table so that the slicing carriage hooks
[ 8 ]
onto the edge of the table.
E
Place the slicing carriage
grooves of the product from above.
F
[ 9 ]
to secure the stand.
.
8 ] [
. Guide the power
15 ] [
.
7 ] [
into the slicing
[ 11 ]
vertically onto
[ 10 ]
into the guide
[ 10 ]
Place the waste holder
plate . The rectangle with the pins is facing
[ 11 ]
the circular blade
[ 4 ]
˜ Operation
m CAUTION! Risk of injury!
The circular blade
4 ] [
put your hands near the circular blade
After switching off the product, the circular
blade continues to move for a short time.
4 ] [
When carrying the food slicer, never hold it
in the middle for avoiding touching the blade.
Always hold both sides for preventing getting
injured.
˜ Setting the cutting width
NOTE: The maximum cutting width
that can be selected on the scale
approx. 17 mm.
Increasing or decreasing the cutting width –
Rotate the turning handle
Rotation direction
Clockwise
Counter-clockwise
Check the cutting width on the scale
After cutting: Set the cutting width to the
0 position.
˜ Switching on/off
Connect the power plug
Press and hold
Press and hold
blade starts up.
[ 4 ]
Hold during the cutting process.
[ 5 ]
Release to stop the circular blade
5 ] [
on the slicing
[ 12 ]
.
is very sharp. Never
[ 4 ]
is
[ 2 ]
:
1 ] [
Result
Increase the cutting
width
Decrease the cutting
width
.
2 ] [
to a power outlet.
15 ] [
.
6 ] [
until the circular
[ 5 ]
4 ] [
GB/IE
.
.
27