Buderus Logacool AC166i-2,6 MS D Bedienungsanleitung Für Den Betreiber Seite 16

4
Maintenance
The fan speed cannot be adjusted in automatic and dehumidification
mode.
Setting the room temperature
▶ Press th . or / key to set the desired room temperature.
▶ Confirm with  key.
Fan step
▶ Press the . or / key to adjust the fan step.
▶ Confirm with  key.
The temperature cannot be adjusted in Fan Mode.
Activating the timer
▶ Press the TIMER key until WEEK 2 appears in the display.
The timer is now switched on. The unit will adjust itself automatically
on these selected times and days.
Deactivating the timer
▶ Press the Kor TIMER key for several seconds.
3.8.4 Additional settings for weekly timer
Provisionally disabling the timer
To disable the timer on selected days only:
▶ Press the TIMER key until WEEK 1 or WEEK 2 appears in the display.
▶ Press the  key.
▶ Press the . or / key to select the weekday.
▶ Press the DAY OFF key.
The selected day is no longer displayed.
The timer is deactivated for the days that are not displayed until the day
has passed.
▶ Press the DAY OFF key again to display the day once again.
▶ Repeat the above if necessary for the other days.
Adopting (copying) settings from one day to another day
▶ Press the TIMER key until WEEK 1 or WEEK 2 appears in the display.
▶ Press the  key.
▶ Press the . or / key to select the day whose settings should be
adopted.
▶ Press the COPY key to copy the settings.
CY appears on the display.
▶ Press the . or / key to select the day to which the settings should
be copied.
▶ Press the COPY key to insert the copied settings.
The selected weekday flashes briefly as confirmation.
▶ Repeat the above steps if necessary to copy the information to other
days.
▶ Press the  key to adopt the changes.
3.9 Other functions
3.9.1 Switching the key sound on/off
To switch the the key sound of the wired room controller on or off:
▶ Press and hold the
and FUNC. keys for three seconds.
16
3.9.2 Turbo cool/Turbo heat
When Turbo cool/Turbo heat is active, the indoor unit operates at
maximum power to heat or cool the room quickly.
Turbo Cool:
▶ Switch on cooling mode.
▶ Press the FUNC. key.
▶ Confirm with  key.
Turbo Heat:
▶ Switch on heating mode.
▶ Press the FUNC. key.
▶ Confirm with  key.
Exiting the function:
▶ Press the FUNC. key again.
▶ Confirm with  key.
3.9.3 Wireless control function
The purpose of this function is to establish a connection via WLAN.
To connect to WLAN an IP-Gateway (optional accessory) must be
installed.
3.9.4 Keylock
The keys of the wired room controller can be locked with the keylock.
To switch the keylock on or off:
▶ Press/keep the TIMER and COPY keys pressed simultaneously for
three seconds.
The symbol appears in the display when the keylock is active.
3.9.5 Follow me function (Follow Me)
This function activates the temperature sensor of the wired room
controller. The room temperature is measured at the position of the
wired room controller instead of at the indoor unit.
▶ Switch off heating or cooling mode if required.
▶ Press the FUNC. key to switch the function on or off.
When the function is active the wired room unit displays the
symbol.
▶ Confirm with  key.
4 Maintenance
CAUTION
Danger due to electric shock or moving parts
▶ Disconnect the power supply before carrying out any maintenance
work.
▶ Have any maintenance steps that are not listed here carried out by an
approved installer.
4.1 Replacing the batteries
You require 2 size AAA batteries. Using rechargeable batteries is not
recommended.
▶ Remove the battery cover ( Fig. 7).
▶ Insert new batteries, ensuring correct polarity.
▶ Reinstall the cover.
Logacool AC166i MS – 6721849825 (2024/06)