Herunterladen Diese Seite drucken

Starting - Hecht 5035 Übersetzung Des Original Betriebsanleitung

Vorschau anzeigen Andere Handbücher für 5035:
LED signalization
EN
 ON /  OFF /  flashing
quickly /  flashing
slowly
CHARGER STATUS
the battery temperature
is not within the charging
DE
temperature range of 0°C
– 50°C
other abnormal situation
Recharge the accumulators in time, before they are discharged fully, otherwise the accumulators
can be damaged permanently (irreversibly).
CS

STARTING

1.
Insert the charged battery into battery holder.
2.
Insert the safety push-button - only HECHT 5035/5038.
3.
Insert the safety key (fig. 8C) - only HECHT 5043 - into slot and switch it to the ON position.
Make sure it snaps into place. Without completely plugged key the machine will not start.
SK
4.
Press the safety push-button (fig. 16A).
5.
Standing behind the mower, pull the switch handle (fig. 16B) and keep it in grasp. The motor
starts. Release the safety button (fig. 16C).
6.
Release the switch handle to stop the motor and blade quickly if necessary.
A
CAUTION!
PL
Do not touch the rotating blade.
Start the motor carefully according to instructions and with body parts, especially feet well
away from the blade.
Do not tilt the lawn mower when starting the motor. Start the mower on a level surface,
HU
free of high grass or obstacles. Keep hands and feet away from the rotating parts. Do not
start the motor when standing in front of the discharge opening. During operation, always
hold the handle and switch handle firmly with both hands.
I
During operation, when the switch handle is released, the motor will stop and thus
Note:
stopping the lawnmower from operating.
If the tool stops during use, the following may be the causes:
A. The maximum current draw of the battery has been exceeded, causing it to automatically
stop powering the tool. Release the switch buttons to reset the tool and pull the switch
buttons to resume operation.
B.
Excessive temperatures will cause the battery to stop powering the tool. Feel the battery
pack, If it is too warm, allow it to cool down.
If the tool still dose not work, recharge the battery.
32 / 48
RED LIGHT
Power indicator status
GREEN LIGHT
Charging indicator status
loading

Diese Anleitung auch für:

50385043