INFICON D-TEK 3 Bedienungsanleitung Seite 8

4 | Charging the Battery
4 Charging the Battery
D-TEK 3 uses a rechargeable lithium ion battery that comes partially charged. INFICON
recommends charging the battery before use. Using the supplied charger or charging
cradle accessory, a dead battery can be charged to 80% in approximately 2 hours and
100% in approximately 3 hours. A full charge typically lasts about 9 hours of operation,
depending on the operating temperature. The power indicator indicates the remaining
battery percentage.
Color
D-TEK 3 can be used while charging.
8 / 260
power button
eject button
battery door
Green
Orange
Red
micro USB power input
volume button headphone jack
% Charge
>30%
10–29%
<10%
074-710-P16B D-TEK 3 Operating Manual
INFICON