INFICON
2 Specifications
074-710-P16B D-TEK 3 Operating Manual
Usage
Sensor type
Compatible refrigerants
• Refrigerant sensor
(standard, PN 724-701-G1)
• CO
sensor (PN 724-701-G2)
2
• Flammable refrigerant (HC) sensor
(PN 724-701-G3)
Sensitivity (tested to EN14624 standard)
• R134a
• R1234yf
• R290
• R744 (CO
)
2
• Ammonia
Battery type
Charging input type
Charging time (starting at 0%)
Battery life
Sensor life
Input voltage
Input current
Warm-up period
Temperature ranges and humidity
• Storage
2
• Operating
• Charging
• Humidity
Altitude
Pollution degree
Overvoltage category
Weight (with battery; not including
carrying case or accessories)
1
To achieve optimal performance and the specified sensitivities, it is recommended to
allow D-TEK 3 to run for 15 minutes prior to use.
indoor/outdoor
infrared
All CFCs, HCFCs, HFCs, HFOs, and
blends (including A2Ls)
R744 (carbon dioxide)
R290, R600a, R441a (see safety
warnings)
1
0.04 oz./yr (1g/yr)
0.02 oz./yr (0.5g/yr)
0.2 oz./yr (5g/yr)
0.07 oz./yr (2g/yr)
0.1 oz./yr (3g/yr)
lithium ion
micro USB
approximately 3 hours
approximately 9 hours
Up to 2000 hrs
5 V (dc) ±5%
1 A ±5%
45–90 seconds
-20–60°C (-4–140°F)
-20–50°C (-4–122°F)
0–45°C (32–113°F)
95% RH NC maximum
2000 m (6500 ft.)
2
2
0.97 lb. (0.44 kg)
Specifications | 2
5 / 260