Silvercrest SOUND SPOT Bedienungs- Und Sicherheitshinweise Seite 68

NOTE: When you change the volume on the product the
volume on the playback device will also so change. This volume
synchronisation function depends on the operating system and the
brand of your playback device.
˜ Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack 2 has a higher
priority over a Bluetooth
Once the AUX cable 14 is plugged into the AUX-in jack 2 ,
the Bluetooth
playback is now switched to AUX-in only and the LED 8 remains
lit in RGB mode.
If the product is off, press the
lights up green and a signal tone sequence sounds.
Switch the playback device on and start playback.
Set the highest possible volume on the playback device. Then
adjust the volume with the +/- buttons
connection.
®
wireless connection will be disconnected. Music
®
button 12 until the signal LED 8
on the speaker.
5 7
GB/IE 69