Parkside PAK 20-Li B2 Originalbetriebsanleitung Seite 24

GB IE
off. Any power tool that cannot be con-
trolled with the switch is dangerous and
must be repaired.
c) Remove the plug from the wall
socket and/or remove the
rechargeable battery before you
change the device's settings,
change accessory parts or put
away the power tool. Such preven-
tive safety measures reduce the risk of
starting the power tool accidentaIly.
d) Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of un-
trained users.
e) Look after the power tool and
application tool carefully. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power tool's
operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and cle-
an. Properly maintained cutting tools
with sharp cutting edges are less Iikely
to bind and are easier to control.
g) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be perfor-
med. Use of the power tool for opera-
tions different from those intended could
result in a hazardous situation.
h) Keep handles and grip surfaces
dry, clean and free from oil and
grease. Slippery handles and grip sur-
faces do not permit safe operation and
24
control over the power tool in unexpec-
ted situations.
5) CAREFUL HANDLING AND USE
OF BATTERY DEVICES
a) Charge the batteries only in
chargers that are recommended
by the manufacturer. Risk of fi re if
a charger that is suitable for a specifi c
type of battery is used with other batte-
ries.
b) In the power tools, use only the
batteries designed for the pur-
pose. The use of other batteries may
result in injuries and risk of fi re.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could cause
bridging of the contacts. A short
circuit between the battery contacts
may cause burns or fi re.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water. If the liquid gets into eyes,
seek medical assistance. Leaking bat-
tery fl uid may cause skin irritations or
burns.
e) Do not use damaged or altered
batteries. Damaged or altered batte-
ries can be unpredictable and lead to
fi re, explosion or risk of injury.
f) Do not expose batteries to fi re
or elevated temperatures. Fire or
temperatures over 130 °C can cause
an explosion.
g) Follow all instructions for char-
ging and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-