Additional Safety Instructions; Initial Operation; Removing/Inserting The Rechargeable Battery; Checking The Charge Status Of The Rechargeable Battery - Parkside Pak 20-Li B2 Originalbetriebsanleitung

tions. Incorrect charging or charging
outside the permitted temperature ran-
ge may destroy the battery and increa-
se the risk of fi re.
6) SERVICE
a) Have your power tool serviced
by a qualifi ed repair person
using only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
b) Never repair damaged batte-
ries. All battery repairs should be
carried out by the manufacturer or au-
thorised customer service centres only.

Additional safety instructions

• Do not use any accessories that
are not recommended by PARK-
SIDE. This can result in electric shock
or fi re.
Observe the safety infor-
mation and notes on char-
ging and proper use as
shown in the instruction
manual for your battery
and charger from the Park-
side X 20 V Team series. A
detailed description of the
charging process and further
information can be found in
the separate operating inst-
ructions.

Initial Operation

Removing/inserting the
rechargeable battery
Ensure that the device is
switched off.
1. To remove the battery (24) from the
device, press the release button (25)
on the battery and pull the battery (24)
out.
2. To insert the battery (24), push the bat-
tery (24) along the guide rail into the
device. You will hear it click into place.
Checking the
charge status of the
rechargeable battery
The battery charge status indicator (24a)
signalises the state of charge of the battery
(24).
Press the button (24b) on the battery. The
state of charge of the battery is displayed
by illuminating the 3-colour LED lights of
the state of charge display.
3 LEDs light up (red, orange and green):
Battery is fully charged.
2 LEDs light up (red and orange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged
Only charge the battery (24) when
the red LED on the charge status
indicator (24a) is on.

Recharging the battery

Allow a hot battery to cool before
charging.
Only charge the battery (24) when
the red LED on the charge status
indicator is on.
GB IE
25