Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Buttons of the Mobil-O-Graph
The Mobil-O-Graph
has 4 buttons which can be used to perform various functions:
®
ON/OFF button
You can turn the Mobil-O-Graph
switching on or off, the button must be held down for at least 2 seconds.
You can also prematurely terminate the measuring process with this button, as well as with any
other button. The pressure in the cuff is then quickly released.
START button
The START button is used to start the automatic log and triggers an additional manual
measurement. In addition, pressing the START button will allow you to continue the measurement
cycle if you have terminated a blood pressure measurement by pressing any button, or if you have
switched the Mobil-O-Graph
single measurement; however, this should only be done after consultation with the doctor. Special
events are recorded using the EVENT button, see EVENT button.
DAY/NIGHT button
Press the DAY/NIGHT button in the evening before going to bed and again in the morning when
you get up. Pressing the DAY/NIGHT button is stored together with the measurement results and
allows your doctor to carry out a more detailed evaluation.
EVENT button
Press the EVENT button to record an event which may affect the blood pressure and to trigger an
additional measurement. Pressing the EVENT button is stored together with your measurement
results and allows your doctor to carry out a more detailed evaluation. Make a note of the
circumstances of the event in a personal measurement log so that you can discuss the events
®
on and off using the ON/OFF button. To avoid accidental
®
off and back on again. The button can also trigger an additional
®
Appendix
EN
63
Werbung
