IEM Mobil-O-Graph Gebrauchsanweisung Seite 342

Product description
3.4 Preparation for measurement
Connect the tube of the cuff to the plug on the housing top of the blood pressure monitor.

First of all, check that the rechargeable batteries are inserted correctly. You should always use fully charged

rechargeable batteries for a new measurement. Alternatively, you can also use alkaline batteries. When
inserting the power pack or batteries, please ensure correct polarity.
Note
Only use the IEM NiMH rechargeable batteries or alkaline batteries provided. Although zinc-carbon batteries
and NiCd rechargeable batteries show sufficient voltage during the battery test, the power is often insufficient
to take measurements for 24 hours. The rechargeable batteries should be discharged and recharged several
times before their first use. Please observe the enclosed instructions for use for the charger.
Switching on
Always check the condition of your blood pressure monitor first before giving it to a patient. This is done by
observing the first notifications on the display of the blood pressure monitor shortly after switching it on.
26