IEM Mobil-O-Graph Gebrauchsanweisung Seite 359

5 Troubleshooting
Note
In case of an error message, the device starts a new measurement after 3 minutes, except for the activation
measurement.
5.1 Main sources of error
The following can cause error measurements or unwanted results:
The patient's arm moving during measurement

Device being switched off (e.g. at night)

Incorrect cuff size put on

The cuff slipping while being worn

Lack of successful manual measurement in the

doctor's practice
Not taking the medication

Incorrect log set

Not fully charged, incorrectly charged or

outdated rechargeable batteries used
Kinking or knotting of the cuff tube

External interference factors such as, for

example, physical activity or driving or using
public transport during measurement may
result in so-called motion artefacts or incorrect
measurements.
Troubleshooting
EN
43