IEM Mobil-O-Graph Gebrauchsanweisung Seite 360

Troubleshooting
5.2 Transmission error
To avoid an error during data transmission, the blood pressure monitor includes a check of the data sent. If an error
has occurred, E004 will appear on the display.
5.3 Checklist
Please go through the following checklist if you have encountered errors when handling the Mobil-O-Graph
errors have simple causes.
Check that all cables are firmly connected and/or that the infrared interface is correctly aligned with the

device.
Check if the blood pressure monitor, computer and printer are switched on (depending on the version you

have received).
Check that the connection cable is connected to the correct serial interface (COM1 to COM4).

Check that the rechargeable batteries are sufficiently charged.

Note
Some errors are combined with a continuous alarm for safety reasons. The continuous alarm can be ended
by pressing any button. If there is residual pressure inside the cuff, open the cuff immediately.
44
. Many
®