Product Operation
5 Pause
•
When the robot is working, you can pause the robot by pressing the robot's AUTO
button or the "standby" button in the APP.
REMINDER
The Robot automatically switches to Sleep Mode if no action is taken for 10 minutes. lf you
want to start the robot again, please press the AUTO button once to wake up the robot.
The robot will work out a new cleaning path and clean the areas again which have been
cleaned before.
Note
After the sleeping robot has been woken up from pause mode, it needs to be
restarted to begin cleaning and the robot will not resume the last unfinished
cleaning.
6 Sleep mode
•
The robot automatically switches to sleep mode if nothing is done for 10 minutes.
16
English EN
Find more information at www.zaco.eu
EN English
Product Operation
Select cleaning modes
This product can set a variety of cleaning modes through the APP to adapt to different
floor conditions and achieve deep cleaning.
1 Auto charge
•
The robot can detect a low power level during the cleaning process and automati-
cally activate self-charging mode and search for the charging station.
2 Spot mode
•
This mode is suitable for floors with a high concentration of dirt. The robot follows
a "spiral" route in a specific area to remove particularly stubborn dirt.
3 Edge Mode
•
This mode is mainly intended for cleaning corners indoors. The robot cleans along
the edge of solid objects, such as walls.
Find more information at www.zaco.eu
17