Werbung
Troubleshooting
Error codes
The robot reminds you with a beep if it is not working properly.
No
Tone
Possible Cause
Wheels or side brushes
01
•
or fan problems.
OBS or bumper sensor
02
• •
or cliff sensor failure.
03
• • •
Robot gets stuck.
04
• • • •
Roller brush or gyro failure.
Note
lf the solutions above don't resolve the issue, please try the following:
1. First, press and hold the AUTO button for 5 seconds to turn off the robot and
then press and hold the AUTO button for 3 seconds to turn the robot back on.
2. lf restarting the robot does not solve the problem, please send the robot to
the service center for repair.
26
English EN
What to do
Check and clean wheels, side brushes,
and fans.
Check the bumper and OBS and clean
cliff sensor.
Move the robot.
Detect and clean the roller brush
and move the robot.
Find more information at www.zaco.eu
EN English
Product Specification
Main device
Item
Diameter
Height
Weight
Power
Battery type
Charging type
Dustbin capacity
Watertank
Cleaning mode
Charging time
Cleaning time
Main body button type
Note
The company reserves the right of final decision on the interpretation
of these terms and conditions.
Find more information at www.zaco.eu
Specification
330 mm
79 mm
3 kg
30 W
Li-ion
Auto Charging / Manual Charging
0.3 L
0.25 L
Auto, Spot, Edge, Daily Schedule
<360 min
>120min
Mechanical Button
27
Werbung
