Werbung
Product Operation
Precautions
Please do not stand in narrow places such
as door thresholds or corridors so that the
robot is not blocked and skips some areas.
Charging station
1 Placement of charging station
•
Connect the adapter with the charging station.
•
Placement of the charging station: Place the charging station against
the wall horizontally. Keep a minimum distance of 1 m to both the left
and right of the charging station and 2 m in front of the charging station.
There must also be no reflective objects such as a mirror near the
charging station.
•
Connect the power.
12
English EN
Please do not stand underneath when the
robot is working above you so that you
cannot get injured by any falling objects.
Find more information at www.zaco.eu
EN English
Product Operation
REMINDER When the charging station is connected to the adapter,
the signal lamp of the dock will light up.
2 Turn on the robot
•
Press and hold the AUTO button for 3 seconds to turn on, and press and
hold it for 5 seconds to turn off.
Note
After the robot has finished its work, please do not switch it off,
but fully charge it for the next use.
If the robot interrupts its work for more than ten minutes, it will switch to
sleep mode. If you want to wake the robot up again, you must to press the
AUTO button once.
Find more information at www.zaco.eu
13
Werbung
