Werbung
Product Operation
3 Placement of charging station
•
Please place the robot on the charging station.
•
lf the AUTO button is flashing orange, the robot is charging. The button lights
up green when it is fully charged. The light then switches off and the device
goes into sleep mode.
•
Charge the robot for 6 hours before using it for the first time.
REMINDER
Please keep the charging pins clean during daily use to ensure a smooth charging process.
Please leave the robot on the charging station for daily use and make sure that the
charging station is connected to the power supply and the switch on the robot is turned
on. If you do not use the robot for a long period of time, please fully charge it, switch it off
and store it in a well-ventilated, dry place.
14
English EN
Find more information at www.zaco.eu
EN English
Product Operation
4 Start cleaning
After waking up the robot, you can press the AUTO button once, and the robot will start
cleaning automatically.
•
Before starting cleaning, make sure that the AUTO button and HOME button
lights on the robot flash simultaneously and that the robot is in wake-up mode.
If the robot is sleeping, please press the AUTO button once to wake it up.
•
If you want to select other modes, please operate the APP.
•
The robot performs autonomous path planning during the work process. If it is
moved manually or operated via the APP (except when paused), the robot will
re-plan the path and may clean the cleaned area. To ensure the working efficiency
of the robot, please do not manipulate the robot. (lf the robot is lifted, it will alarm
and stop cleaning, and you need to press the Auto button or operate the APP to
restart cleaning)
Find more information at www.zaco.eu
15
Werbung
