Cleaning - Smartwares Rm520 Montage-, Bedienungs- Und Sicherheitshinweise

If pressing the Test button
alarm, the smoke detector is not working properly. If
this is the case, please contact the service partner.
als on fire.
If the smoke detector sounds an irregular/low tone,
it means that there is a defect.

Cleaning

To guarantee its proper function, the smoke detector should
be cleaned once a month to remove dust deposits and
cleaned using a vacuum cleaner every six months.
Ensure that all of the device's openings are dust-free.
GB/IE/NI
60
CAUTION! Never test the smoke detec-
tor by holding the device over an open
flame! There is a hazard of damaging
the device and setting flammable materi-
CAUTION! Due to the loud volume of
the smoke detector (85 decibels), you
should stand at an arm's length from the
device when testing the smoke detector.
does not trigger an
2