Installation; Positioning The Smoke Detector - Smartwares Rm520 Montage-, Bedienungs- Und Sicherheitshinweise

Hold the Test button
alarm sounds, then release. If the alarm does not
sound when pressing the Test button
smoke detector is not working properly; please
consult a service partner.

Installation

Note: You will need a power drill for the installation
work.
Note: Please also follow the instructions for your power
drill.
Important: Before starting to drill, make sure that
there are no electrical cables in the place where you
wish to drill.

Positioning the smoke detector

Please observe the following recommendations for
positioning the smoke detector to guarantee the
GB/IE/NI
52
(see Figure C) until the
2
, the
2