Connecting The Storage System To The Ethernet Network; Install The Shielding Plate - Bosch BPT-S Hybrid Installationsanleitung

English
Bosch Power Tec GmbH
6. Connect the connector to the CAN Open terminal
of the storage system
7. Connect the CAN open cable to the PV sensor
(according to the PV sensor instruction manual)
■
The PV sensor is connected.
7.3.2 Connecting the storage system to the
Ethernet network
Materials required
Ethernet cable

▶
Procedure
1. Connect the Ethernet cable to the storage
system's LAN socket
2. Connect the Ethernet cable to the router
■
The storage system is connected to the Ethernet
network.
7.4

Install the shielding plate

▶
Procedure
7.7: Shielding plate
1. Feed the longest earthing cable through the
opening in the door channel
External cabling | 109
Storage system | Installation manual