Installing The Ventilation Grille; Installing The Battery Management Module (Bmm) - Bosch BPT-S Hybrid Installationsanleitung

English
WARNING
Bosch Power Tec GmbH
6.6

Installing the ventilation grille

▶
Procedure
1. Place the ventilation grille in front of the battery
cover with the opening facing downwards
The springs on the grille should point into the
interior of the storage system.
6.15: Screw the ventilation grille in place
2. Use the 4 mm Allen key to screw the ventilation
grille in place at the front and back with 11 M5
Allen screws and washers (tightening torque 2.7
Nm)
■
The ventilation grille is installed.
6.7 Installing the battery management
module (BMM)
Risk of injury due to heavy weight
The heavy weight of the components may cause injury
during installation, disassembly and transport.
Transport and mount the components with two

people
Before transporting the device to the installation

location, remove the housing
Installation | 73
Storage system | Installation manual