Installing The Battery Cover - Bosch BPT-S Hybrid Installationsanleitung

English
Bosch Power Tec GmbH
6.13: Connecting the battery cable
7. Slide the battery tray back into the rear of the
housing
■
The batteries have been installed and connected.
6.5

Installing the battery cover

▶
Procedure
1. Place the battery cover over the batteries so that
the four threaded bolts on the rear wall of the
housing can engage in the holes on the battery
cover.
2. Direct the battery communication cable and
battery cable out of the openings in the battery
cover (1)
Installation | 71
Storage system | Installation manual