Connecting To The Internal Distribution Box - Bosch BPT-S Hybrid Installationsanleitung

80 | Installation
Storage system | Installation manual
6.20: Install the string inverter and tighten the screws
■
The string inverter is fitted.
6.9.2

Connecting to the internal distribution box

Info
Observe the maximum tightening torque when
connecting the cables (Tightening torques overview,
p. 139)
▶
Procedure
1. Connect the 2-core backup cable (1) to the upper
terminals 5 and 6 on the internal distribution box
2. Connect the 4-core intermediate circuit cable (DC
link) (2) to the upper terminals 1-4 on the internal
distribution box
English
Bosch Power Tec GmbH