Connector Block - Bosch BPT-S Hybrid Installationsanleitung

English
Bosch Power Tec GmbH
[2]
Battery converter
Marked with a yellow dot.
3.6.7

Connector block

The connector block is located behind the housing
door. The connector block connects the storage
system externally. It comprises the following
terminals:
CAN
V-CAN Open LAN
(1)
(2) (3)
3.15: Connector block behind the housing door
[1]
V-CAN
CAN bus terminal for analysis tools (e.g.
InverterSetup). On delivery, a terminating resistor is
fitted to this terminal.
[2]
CAN Open
Terminal for the PV sensor (optional)
[3]
LAN
Ethernet network terminal
[4]
RS485
Terminal for the energy meter
[5]
USB
USB ports, e.g. for updating firmware
Technical description | 47
RS485 USB
(5)
(4)
Storage system | Installation manual
USB