Securing The Housing Against Tipping Over - Bosch BPT-S Hybrid Installationsanleitung

66 | Installation
Storage system | Installation manual
6.9: Remove the screws from the side
2. Pull the battery cover diagonally upwards and
forwards out of the housing
■
The battery cover has been removed.
6.3 Securing the housing against tipping
over
Prerequisites
 The anti-tilt device is installed on the rear wall of the
housing
The correct distances around the device have been

checked (Positioning the housing, p. 54)
F (1 : 5)
Bosch Power Tec GmbH
English