String Inverter Capacitor; Mounting - Bosch BPT-S Hybrid Installationsanleitung

English
WARNING
WARNING
Bosch Power Tec GmbH
6.9

String inverter capacitor

Risk of injury due to heavy weight
The heavy weight of the components may cause injury
during installation, disassembly and transport.
Transport and mount the components with two

people
Before transporting the device to the installation

location, remove the housing
Risk of injury due to sharp edges
The components have sharp edges, which can cause
hand injuries if they are not handled carefully.
Wear protective gloves

Mount the components with two people

6.9.1

Mounting

▶
Procedure
1. In the top left of the housing: Install both string
inverter pins
2. At the bottom of the string inverter: Use the 5 mm
Allen key to screw in and tighten one M6 Allen
screw and washer (tightening torque 2.7 Nm)
Installation | 79
Storage system | Installation manual