Auriol HG06061A-DCF Bedienungs- Und Sicherheitshinweise Seite 29

If the reception of the radio signal continues to be interrupted, you
can turn on / off the automatic radio time receive function manually.
Press and hold down the MODE
for about 3 seconds. DCF is shown in the LC display, the
automatic radio time receive function is turned off. Now you
can set the time and date manually (see Basic settings).
Press and hold down the MODE
for about 3 seconds again. DCF disappear, the automatic
radio time receive function is turned on. The clock will start the
reception of the radio time during early morning.
Activating reception from the
outdoor sensor
The outdoor sensor will transmit a signal about twice a minute,
which is automatically received by the main station. However, you
may also manually activate reception of the signal. To do so, press
and hold the – / CH button
symbol flashes. Following successful reception the animation
of the symbol will disappear and the transmitted temperature and
humidity will appear in the display.
Background lighting
Press SNOOZE / LIGHT button
illuminates for 10 seconds. While plug in the adapter power
have continuous background lighting. There are four levels of
background lighting to choose from.
and + / MEM
11
and + / MEM
11
for three seconds until the channel
9
. The background lighting
8
button
10
button
10
GB/IE/NI 29