Nidec RK-3E Bedienungsanleitung Seite 5

Handle with extreme care when
moving or lifting, wheel weighs
93lbs.
Serious injury can occure if moving
or lifting is done improporly.
Do not move or hold the wheel
while power is on
The wheel cabinet may start turning and
your hand may be caught between the
wheelhead and the enclosure.
Do not lift the wheel by the
wheelhead.
May cause damage or injury.
Place the wheel on a flat,
horizontal surface.
It may cause a
vibration if the
placement is not
level.
Do not remove the bottom cover.
There are electrical parts which
need to be protected from hands,
water and other materials.
Warning
！
Do not plug into or unplug from
AC outlet with wet hands.
May cause electrocution.
Be careful of loose fitting clothing
and long hair.
May catch in clay or wheelhead
causing damage or injury.
Caution
！
Be careful of jewelry and long
nails.
Jewelry may be caught in equipment
and cause damage or injury. Finger
nails may be chipped or broken.
Do not remove the bolts for
installation of the ball mill rack.
Water may reach the circuit board
and cause damage to the product.
Do not place a TV, radio, or an
antenna to close to the wheel.
It may cause noise and picture
distortion.
- 4 -