Safety Precautions - PeakTech 2801 Bedienungsanleitung

1. Safety Precautions

This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) amended by 2004/22/EC (CE-Marking). Pollution
degree 2.
To ensure safe operation of the equipment, the following safety
precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
* use extreme caution when the laser beam is turned ON
do not let the beam enter your eye, another person's eye or
*
the eye of an animal
* be careful not to let the beam on a reflective surface strike
your eye
* do not allow the laser light beam impinge on any gas which
can explode
* do not let the beam of any body
* Do not operate the meter before the cabinet has been closed
and screwed safely as terminal can carry voltage.
* Comply with the warning labels and other info on the
equipment.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature before
taking up measurement (important for exact measurements).
Replace the battery as soon as the battery indicator "BAT"
*
appears. With a low battery, the meter might produce false
reading that can lead to electric shock and personal injury.
-25-