PeakTech 2801 Bedienungsanleitung Seite 42

6.14 readings memory
In order to store a displayed measurement value to the internal
memory of 99 readings, press the "Memory" button (9) for about
3 seconds until the memory icon appears. Go on as necessary,
with all to be saved measurements and continue until the
memory is exhausted.
To recall a stored measured value, press and release the
"Memory" button (9) briefly. The requested measured value is
now displayed in the main line, where the storage number (1 -
99) is shown in the upper left corner of the display. Switch trough
the stored values with the "+" and "-" keys.
To delete a stored measured value, press the "Off/Clear" button
(5).
-41-