PeakTech 2801 Bedienungsanleitung Seite 43

6.15 Stacking Out - Preset distance
If you want to preset a certain measuring distance determined
and then for example change the distance between the laser
distance meter on a moving platform, hold down the "Area/
Volume" button (3) until the stacking icon appears in the display:
Change the value of the distance (a) with the "-" and "+" - keys
and confirm the value with the "ON/MEAS" key (1). Now change
the value for the flashing second distance (b) also with the keys
"-" and "+". Confirm again with "ON/MEAS" key (1).
Now the distance measurement starts, which shows the
remaining distance to reach the selected distance in the main
display. If the meter is placed too far away from the set value, an
icon appears that you should move forward. Are you too close,
an icon appears and shows you to move backwards:
Move forwards: Move backwards:
Once the desired distance achieved following symbol appears:
-42-