PeakTech 2801 Bedienungsanleitung Seite 38

6.10 Area Measurement
Press the "Area- / Volume" button (3).
The area symbol appears on the display:
Press the "ON/MEAS" key (1) for the first length measurement
(eg length).
Press the "ON/MEAS" key (1) again for the second length
measurement (eg width).
The result of the area measurement is shown in the third line,
the individual measured values are displayed in lines 1 and 2.
6.11 Volume Measurement
Press for volume measurement the "Area- / Volume" button (3)
twice until the symbol for volume measurement appears in the
display:
Press the "ON/MEAS" key (1) for the first
distance measurement (eg length) and then, again the "ON /
MEAS" key (1) for the second distance measurement (eg width).
The result of the area measurement of already measured values
will be displayed in the main display.
Press the "ON/MEAS" key (1) again to measure the third
distance (eg height). The value is displayed in the third line.
The result of the volume measurement will be shown in the main
line, the three previously measured readings are displayed in
rows 1, 2 and 3.
-37-