Troubleshooting; Service; Guarantee - Parkside Psssa 20-Li B2 Originalbetriebsanleitung

local waste management provider or
our service centre. Dispose of batteries
in a discharged state. We recommend

Troubleshooting

The following table will assist you in fixing faults:
Problem
Device does not start
Device works with interrup-
tions
Poor sawing performance
Saw blade quickly becomes
blunt

Service

Guarantee

Dear Customer,
This product is provided with a 3 year
guarantee from the date of purchase.
covering the contacts with an adhesive
strip to protect against short circuits. Do
not open the battery.
Possible cause
Rechargeable battery (16)
not inserted
On/Off switch (3) is broken contact the service centre.
Rechargeable battery (16)
discharged
Defective motor
Internal loose contact
On/Off switch (3) is broken contact the service centre.
Saw blade (5/9/13/14) un-
suitable for the workpiece to
be processed
Saw blade (5/9/13/14)
blunt
Low battery power
Incorrect sawing speed
Saw blade (5/9/13/14) un-
suitable for the workpiece to
be processed
Too much pressure applied
Sawing speed too high
In case of defects, you have statutory
rights against the seller of the product.
These statutory rights are not restricted by
our guarantee presented below.
GB
Troubleshooting
Inserting the battery (Fig. C),
p. 33
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
contact the service centre.
contact the service centre.
Use a suitable saw blade
(5/9/13/14)
Use a new saw blade (5/9/
13/14)
Charge the battery (see the
separate operating instruc-
tions for the rechargeable
battery and charger)
Adjust sawing speed
Use a suitable saw blade
(5/9/13/14)
Reduce the pressure
Reduce the sawing speed
MT
35