Rothenberger ROFUSE TURBO S Bedienungsanleitung Seite 25

Welder Code
On Off
5.9 Setting sleeve traceability
 In the parameters menu, press the second button from the right once to get to the sleeve
traceability submenu.
Parameter 2/7
Traceability sleeve
The right-hand button takes you to the selection of whether sleeve traceability should be active
or inactive. With one of the two middle buttons, make the desired selection, and confirm with the
right-hand button. If you select the sleeve traceability code in this menu, it must be entered when
entering the welding parameters.
Traceability sleeve
On Off
5.10 Setting pipe traceability
 In the parameters menu, press the second button from the right twice to get to the pipe
traceability submenu.
Parameter 3/7
Traceability pipe
The right-hand button takes you to the selection of whether the pipe traceability should be active
or inactive. With one of the two middle buttons, make the desired selection, and confirm with the
right-hand button. If you select the pipe traceability code in this menu, it must be entered when
entering the welding parameters.
Traceability pipe
On Off
5.11 Setting the owner
 In the parameters menu, press the second button from the right three times to get to the
owner submenu.
Parameter 4/7
Owner
ENGLISH 21