Werbung
Starting up
Make sure that C5.1t/S2t is connected properly to
your computer.
Open the "Start" menu of the Windows, and select the
item "ZFX Plug-in" in the folder "Program"-"ZOOM"-
"ZFX Plug-in".
ZFX Plug-in starts up as a standalone program.
Configuring the
S2t/C5.1t driver
To configure the S2t/C5.1t driver, start up "ZOOM S2t
C5.1t Audio" in the Windows control panel.
Adjust the audio latency with the "ASIO Settings" bar
to the position where there is no noise.
* The available latency depends on your environments.
Basic Operation Guide
You can start up "Patch
Manager" with [PATCH]
button. Here you can
select/operate the patches.
The catalog contains
various effect types
including amplifiers and
stomp boxes. These effect
types can be drag-and-
dropped into each area to
be used. Catalog pages can
be turned with mouse wheel
or the triangle buttons at the
right-bottom.
You can delete the instruments by double-clicking right
button over them. Amplifiers, cabinets, and microphones
can be deleted as well.
Trademarks
* Microsoft, Windows XP and Windows Vista are registered trademarks of Microsoft Corporation in
the U.S.A. and in other countries.
* Intel and Pentium are the registered trademark of Intel Corporation.
* AMD and Athlon are the registered trademark of Advanced Micro Devices Inc.
* VST PlugIn Interface Technology by Steinberg Media Technologies GmbH.
* Steinberg, Cubase and VST are registered trademarks of Steinberg Media Technologies GmbH.
* Adobe and Adobe Acrobat are registered trademarks of Adobe Systems Incorporated.
* MIDI is registered trademark of Association of Musical Electronics Industry (AMEI).
* All other trademarks, product names, and company names mentioned in this document are the
property of their respective owners.
* All trademarks and registered trademarks mentioned in this manual are for identification purposes
only and are not
Basic Operation
When the S2t/C5.1t is connected properly to your computer, this
logo mark lights on. With no connection, this logo mark lights off.
Please connect the S2t/C5.1t whenever you are using ZFX Plug-
in, since the copy protection runs with no connection, and
Select the pickup type of the guitar which
bypasses all signals despite whatever your effect settings are.
you are using.
You can drag-and-drop the
cabinets and microphones
into this area from the
catalog leftward. With the
mouse wheel operation or
the [+/-] buttons, you can
adjust the distance between
the cabinet and the
microphone. Microphone
can also be moved vertically
with drag-and-drop
operation.
Amplifiers and other instruments have knobs and switches
within. Their effect tone can be adjusted by dragging
knobs vertically and clicking switches.
System Requirements
Windows XP(SP2)/Windows Vista
Pentium4 1.4GHz/Athlon 64 or higher
512MB RAM(1GB or higher suggested)
Display resolution 1024x768 or higher
USB 1.1 or 2.0 compatible port
Supported plug-in format: VST2.4
* ZFX Plug-in includes stand-alone application.
* 64bit operating system is not supported.
* USB hub is not supported.
* Intel Chipset is recommended.
You can drag-and-drop
the amplifiers into this
area from the catalog
leftward. When no
cabinets or microphones
are selected, the
corresponding cabinet
and microphone will be
set automatically.
You can magnify this
area with the mouse
wheel operation or the
[+/-] buttons. When
magnified, you can drag
the floor to scroll the
view.
ZOOM CORPORATION
ITOHPIA Iwamotocho 2chome Bldg. 2F, 2-11-2,
Iwamoto-cho,Chiyoda-ku, Tokyo 101-0032, Japan
Web Site: http://www.zoom.co.jp
© ZOOM Corporation
Reproduction of this manual, in whole or in part, by any means, is prohibited.
ZFX-Startup-E-1.0.0.0
Werbung
