V1.98 26.01.2020
V1.97 14.11.2019
V1.96 03.09.2019
V1.95 14.08.2019
V1.94 02.08.2019
V1.93 25.06.2019
V1.92 26.03.2019
V1.91 14.12.2018
V1.9 01.10.2018
V1.8
26.03.2018
V1.7
xxx2017
V1.6
03.11.2017
remarks calibration ADI screen
Englisch text in blue for better readability
corrections at the table batteries for the battey weight
Adding dimensions MC300 50kW
Adding new motordrawings HPD20
removing HPD12/S
Adding installation example for cooling HPD32/40/50D
Adding parametertable ADI
Adding MC Parameter related to special I/O functionality
additional table for connection external throttle sensors for interfaces
New ADI screen and features implemented
correction cooling volumetric flow rate for HPDx motors.
Adding power/thrust values for new Motors
Adding new motor curves for efficiency
New final capture "warranty".
New warning notice for charging batteries with different SOC.
New SDI parameter settings via serial monitor
New drive setup overview
Replace PI300 with MC300
RCM removed, no longer in production
New wiring scheme overview
Kursivstellung des englischen Textes.
SDI next generation Display description completed
Correction of nominal rpm/V load constant HPD16/32D
New Motorcontroller Version 3.x
Überführung des Dokumentes in Office 2016 Umgebung und Übersetzung
Transfer of document to new Office 2016 environment and translation
Allgemeine Korrekturen durchgeführt
General corrections performed
Entfernung des Kapitels HPD25D wegen Neuentwicklung HPD32D
Removal of chapter HPD25D because of new development HPD32D
Im Kapitel Akkus die Ansicht Parametrierung über E-Drive Studio entfernt
Ergänzungen beim Troubleshooting Akkus.
Ergänzungen zum Hibernate Modus
Hinweis zum Bedarf eines RCM beim Einsatz eines SDI.
SDI Errorcodes und ADI Fehlermeldungen in einer Liste zusammengefasst.
Ergänzungen bei den Features zum Akkupack
Parameterization view in E-Drive Studio removed from "Batteries" chapter
Additions to troubleshooting for the batteries.
Additions to the hibernate mode
Note on requirement of an RCM for using an SDI.
SDI error codes and ADI error messages summarized in a single list.
Additions to the features of the battery pack
Im Kapitel Akkus, den Hinweis zur Akkukühlung und zur Einbausituation
hinzugefügt. Technische Daten der Akkus bei den Stromentnahmen
154